Most of the time forks are used for contributing code only, so not
having
issues, projects, release and packages is a better default for such
cases.
They can still be enabled in the settings.
A new option `DEFAULT_FORK_REPO_UNITS` is added to configure the default
units on forks.
Also add missing `repo.packages` unit to documentation.
code by: @brechtvl
## ⚠️ BREAKING ⚠️
When forking a repository, the fork will now have issues, projects,
releases, packages and wiki disabled. These can be enabled in the
repository settings afterwards. To change back to the previous default
behavior, configure `DEFAULT_FORK_REPO_UNITS` to be the same value as
`DEFAULT_REPO_UNITS`.
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
closes#13585fixes#9067fixes#2386
ref #6226
ref #6219fixes#745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
#18058 made a mistake. The disableGravatar's default value depends on
`OfflineMode`. If it's `true`, then `disableGravatar` is true, otherwise
it's `false`. But not opposite.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
If user has reached the maximum limit of repositories:
- Before
- disallow create
- allow fork without limit
- This patch:
- disallow create
- disallow fork
- Add option `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT` (Default **true**) :
enable this allow user fork repositories without maximum number limit
fixed https://github.com/go-gitea/gitea/issues/21847
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Since #20218 introduced internal watching template, template watching
should be removed from `air`. This will prevent restart the whole server
once the template files changed to speed up developing when using `make
watch`.
To ensure `make watch` will reuse template watching, this PR introduced
a new ENV `GITEA_RUN_MODE` to make sure `make watch` will always run in
a dev mode of Gitea so that template watching will open.
This PR also added more exclude testdata directories.
For a long time Gitea has tested PR patches using a git apply --check
method, and in fact prior to the introduction of a read-tree assisted
three-way merge in #18004, this was the only way of checking patches.
Since #18004, the git apply --check method has been a fallback method,
only used when the read-tree three-way merge method has detected a
conflict. The read-tree assisted three-way merge method is much faster
and less resource intensive method of detecting conflicts. #18004 kept
the git apply method around because it was thought possible that this
fallback might be able to rectify conflicts that the read-tree three-way
merge detected. I am not certain if this could ever be the case.
Given the uncertainty here and the now relative stability of the
read-tree method - this PR makes using this fallback optional and
disables it by default. The hope is that users will not notice any
significant difference in conflict detection and we will be able to
remove the git apply fallback in future, and/or improve the read-tree
three-way merge method to catch any conflicts that git apply method
might have been able to fix.
An additional benefit is that patch checking should be significantly
less resource intensive and much quicker.
(See
https://github.com/go-gitea/gitea/issues/22083\#issuecomment-1347961737)
Ref #22083
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Gitea will attempt to lookup its location using LookPath however, this
fails on cmd.exe if gitea is in the current working directory.
exec.LookPath will return an exec.ErrDot error which we can test for and
then simply using filepath.Abs(os.Args[0]) to absolute gitea against the
current working directory.
Fix#22063
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Gitea will migrate the database model version automatically, but it
should be able to be disabled and keep Gitea shutdown if the version is
not matched.
Fixes#21865.
Scheme-based normalization ([RFC 3986, section
6.2.3](https://www.rfc-editor.org/rfc/rfc3986#section-6.2.3)) was
already implemented, but only for `defaultAppURL`.
This PR implements the same for `AppURL`.
Signed-off-by: Saswat Padhi <saswatpadhi@protonmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Change all license headers to comply with REUSE specification.
Fix#16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Unfortunately the fallback configuration code for [mailer] that were
added in #18982 are incorrect. When you read a value from an ini section
that key is added. This leads to a failure of the fallback mechanism.
Further there is also a spelling mistake in the startTLS configuration.
This PR restructures the mailer code to first map the deprecated
settings on to the new ones - and then use ini.MapTo to map those on to
the struct with additional validation as necessary.
Ref #21744
Signed-off-by: Andrew Thornton <art27@cantab.net>
Enable this to require captcha validation for user login. You also must
enable `ENABLE_CAPTCHA`.
Summary:
- Consolidate CAPTCHA template
- add CAPTCHA handle and context
- add `REQUIRE_CAPTCHA_FOR_LOGIN` config and docs
- Consolidate CAPTCHA set-up and verification code
Partially resolved#6049
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
This patch provide a mechanism to disable RSS/Atom feed.
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
This PR enhances the CORS middleware usage by allowing for the headers
to be configured in `app.ini`.
Fixes#21746
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Attempt clarify the AppWorkPath in the documentation by using different
notation and adding a section to the start of the cheat sheet.
Fix#21523
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Related #20471
This PR adds global quota limits for the package registry. Settings for
individual users/orgs can be added in a seperate PR using the settings
table.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix https://github.com/go-gitea/gitea/issues/21666
Caused by https://github.com/go-gitea/gitea/pull/19663
Before: when install, the INTERNAL_TOKEN was always generated and saved.
But the internal token may be already there by INTERNAL_TOKEN_URI
After: INTERNAL_TOKEN_URI file must be non-empty. When install, skip
internal token generation if the token exists.
This patch provide a mechanism to disable
[sitemap](https://github.com/go-gitea/gitea/pull/18407).
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: 6543 <6543@obermui.de>
Only load SECRET_KEY and INTERNAL_TOKEN if they exist.
Never write the config file if the keys do not exist, which was only a fallback for Gitea upgraded from < 1.5
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds mathematical rendering with KaTeX.
The first step is to add a Goldmark extension that detects the latex
(and tex) mathematics delimiters.
The second step to make this extension only run if math support is
enabled.
The second step is to then add KaTeX CSS and JS to the head which will
load after the dom is rendered.
Fix#3445
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Adds a new option to only show relevant repo's on the explore page, for bigger Gitea instances like Codeberg this is a nice option to enable to make the explore page more populated with unique and "high" quality repo's. A note is shown that the results are filtered and have the possibility to see the unfiltered results.
Co-authored-by: vednoc <vednoc@protonmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
This should solve the main problem of dynamic assets getting stale after
a version upgrade. Everything not affected will use query-string based
cache busting, which includes files loaded via HTML or worker scripts.
This PR adds functionality to allow Gitea to sit behind an
HAProxy and HAProxy protocolled connections directly.
Fix#7508
Signed-off-by: Andrew Thornton <art27@cantab.net>
This adds support for getting the user's full name from the reverse
proxy in addition to username and email.
Tested locally with caddy serving as reverse proxy with Tailscale
authentication.
Signed-off-by: Will Norris <will@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* increase default page sizes to 20
* adjust docs to reflect that the setting is used all over the place
* fix tests
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Use default values when provided values are empty
- When provided values are empty like `:3000` would imply that host is
empty, use the default value.
- Resolves#20316
* Update database.go
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Creating the directory automatically is not correct.
In other places for ssh key writing (RewriteAllPrincipalKeys / appendAuthorizedKeysToFile, etc), the directory will still be created when updating the keys.
This PR will resolve the confusing and annoying problem: the dummy and empty ".ssh" directory in new git home.
* Add git.HOME_PATH
* add legacy file check
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* pass env GNUPGHOME to git command, move the existing .gitconfig to new home, make the fix for 1.17rc more clear.
* set git.HOME_PATH for docker images to default HOME
* Revert "set git.HOME_PATH for docker images to default HOME"
This reverts commit f120101ddc.
* force Gitea to use a stable GNUPGHOME directory
* extra check to ensure only process dir or symlink for legacy files
* refactor variable name
* The legacy dir check (for 1.17-rc1) could be removed with 1.18 release, since users should have upgraded from 1.17-rc to 1.17-stable
* Update modules/git/git.go
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
* remove initFixGitHome117rc
* Update git.go
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Unfortunately it appears that 2048 bit RSA keys can occasionally be created in such
a way that they appear to have 2047 bit length. This PR simply changes our defaults to
allow these.
Fix#20249
Signed-off-by: Andrew Thornton <art27@cantab.net>
- Completely remove U2F support from 1.18.0, 1.17.0 will be the last
release that U2F is somewhat supported. Users who used U2F would already
be warned about using U2F for a while now and should hopefully already
be migrated. But starting 1.18 definitely remove it.
